Digital Three-phase Voltmeter
DVM3-96
General Description
The DVM3 meter is designed to monitor LN and LL voltage of 3P4W network at the same time. It helps to check three-phase voltage failures such as over, under voltage and unbalance voltage between phases without using a selection switch.
iLEC DVM3-96 Digital Three-phase Voltmeter
Specifications
| Parameter | Values |
| Operating voltage (Un) | 150V–270V AC or 110V AC |
| Operating frequency | 50/60Hz |
| Operating power | < 4VA |
| Operating temperature | 0°C ~ 55°C |
| Measurement range (L-N) | 1–300V AC |
| Measurement range (L-L) | 5–500V AC |
| Measurement precision | ± 1% |
| Display | 3x3 digit 14mm |
| Connection type | Plug-in terminal |
| Cable diameter | 1.5 mm² |
| Weight | < 300g |
| Panel hole size | 91 x 91 mm |
| Mounting front panel | Panel mounted |
| Operating altitude | < 2000 m |
|
• If the phase sequence is correct, L1, L2, L3 will be written from top to bottom in the display. • If the phase sequence is reversed, L1, L3, L2 will be written from top to bottom in the display. |
|
Wiring and dimensions
( Connection diagram )
( Dimension drawing )
Display selection
Resources & Support
- Technical documents:
Model DVM3-96